Crossword Solver > found answer > DELAMINATION

Welcome to Anagrammer Crossword Genius! Keep reading below to see if delamination is an answer to any crossword puzzle or word game (Scrabble, Words With Friends etc). Scroll down to see all the info we have compiled on delamination.

CROSSWORD
ANSWER

delamination

Searching in Crosswords ...

The answer DELAMINATION has 0 possible clue(s) in existing crosswords.

Searching in Word Games ...

The word DELAMINATION is VALID in some board games. Check DELAMINATION in word games in Scrabble, Words With Friends, see scores, anagrams etc.

Searching in Dictionaries ...

Definitions of delamination in various dictionaries:

The act of splitting or separating a laminate into layers.

The splitting of the blastoderm into two layers of cells to form a gastrula.

DELAMINATION - Delamination is a mode of failure for composite materials and steel. In laminated materials, repeated cyclic stresses, impact, and so on can cause l...

Word Research / Anagrams and more ...

Keep reading for additional results and analysis below.

Possible Dictionary Clues
The act of splitting or separating a laminate into layers.
Embryology The splitting of the blastoderm into two layers of cells to form a gastrula.

Delamination description
Delamination is a mode of failure for composite materials and steel. In laminated materials, repeated cyclic stresses, impact, and so on can cause layers to separate, forming a mica-like structure of separate layers, with significant loss of mechanical toughness. Delamination also occurs in reinforced concrete structures subject to reinforcement corrosion, in which case the oxidized metal of the reinforcement is greater in volume than the original metal. The oxidized metal therefore requires greater space than the original reinforcing bars, which causes a wedge-like stress on the concrete. This force eventually overcomes the relatively weak tensile strength of concrete, resulting in a separation (or delamination) of the concrete above and below the reinforcing bars. * Fiber pull-out (another form of failure mechanism) and delamination can occur, in part, due to weak adhesive bonding between the fibers and the polymer matrix.Delamination failure may be detected in the material by its sound; solid composite has bright sound, while delaminated part sounds dull, reinforced concrete sounds solid, whereas delaminated concrete will have a light drum-like sound when exposed to a dragged chain pulled across its surface. Bridge decks in cold climate countries which use de-icing salts and chemicals are commonly subject to delamination and as such are typically scheduled for annual inspection by chain-dragging as well as subsequent patch repairs of the surface. Other nondestructive testing methods are used, including embedding optical fibers coupled with optical time domain reflectometer testing of their state, testing with ultrasound, radiographic imaging, and infrared imaging. * Some manufacturers of carbon composite bike frames suggest disposing of the frame after a crash, because the impact could have created flaws inside the material. * As there is increasing use of composite materials in aircraft construction (e.g. the Boeing 787 and the Airbus A350), delamination is an air safety concern, especially in the tail sections of the airplanes. * For aircraft, satellite, and other critical components, the requirements for quality may be very strict. Using a test method, such as manual tap testing, to produce audible sounds is not reliable. Small defects, or those several layers deep, may be very difficult, if not impossible, to detect. The change in pitch becomes slight enough that the human ear cannot resolve it. Using sound is also subjective and dependent on the inspector's quality of hearing as well as judgement. Any intentional variations in the part may also change the pitch of the produced sound, influencing the inspection. Some of these variations include ply overlaps, ply count change gores, core density change (if used), and geometry. While these features can all exist in the same part and sound different from each other, none are defects. Inspection methods such as ultrasound, infrared thermography, shearography, and radiography produc...

Delamination description

Delamination is a mode of failure for composite materials and steel. In laminated materials, repeated cyclic stresses, impact, and so on can cause layers to separate, forming a mica-like structure of separate layers, with significant loss of mechanical toughness. Delamination also occurs in reinforced concrete structures subject to reinforcement corrosion, in which case the oxidized metal of the reinforcement is greater in volume than the original metal. The oxidized metal therefore requires greater space than the original reinforcing bars, which causes a wedge-like stress on the concrete. This force eventually overcomes the relatively weak tensile strength of concrete, resulting in a separation (or delamination) of the concrete above and below the reinforcing bars.
* Fiber pull-out (another form of failure mechanism) and delamination can occur, in part, due to weak adhesive bonding between the fibers and the polymer matrix.Delamination failure may be detected in the material by its sound; solid composite has bright sound, while delaminated part sounds dull, reinforced concrete sounds solid, whereas delaminated concrete will have a light drum-like sound when exposed to a dragged chain pulled across its surface. Bridge decks in cold climate countries which use de-icing salts and chemicals are commonly subject to delamination and as such are typically scheduled for annual inspection by chain-dragging as well as subsequent patch repairs of the surface. Other nondestructive testing methods are used, including embedding optical fibers coupled with optical time domain reflectometer testing of their state, testing with ultrasound, radiographic imaging, and infrared imaging.
* Some manufacturers of carbon composite bike frames suggest disposing of the frame after a crash, because the impact could have created flaws inside the material.
* As there is increasing use of composite materials in aircraft construction (e.g. the Boeing 787 and the Airbus A350), delamination is an air safety concern, especially in the tail sections of the airplanes.
* For aircraft, satellite, and other critical components, the requirements for quality may be very strict. Using a test method, such as manual tap testing, to produce audible sounds is not reliable. Small defects, or those several layers deep, may be very difficult, if not impossible, to detect. The change in pitch becomes slight enough that the human ear cannot resolve it. Using sound is also subjective and dependent on the inspector's quality of hearing as well as judgement. Any intentional variations in the part may also change the pitch of the produced sound, influencing the inspection. Some of these variations include ply overlaps, ply count change gores, core density change (if used), and geometry. While these features can all exist in the same part and sound different from each other, none are defects. Inspection methods such as ultrasound, infrared thermography, shearography, and radiography produc...

Anagrammer Crossword Solver is a powerful crossword puzzle resource site. We maintain millions of regularly updated crossword solutions, clues and answers of almost every popular crossword puzzle and word game out there. We encourage you to bookmark our puzzle solver as well as the other word solvers throughout our site. Explore deeper into our site and you will find many educational tools, flash cards and plenty more resources that will make you a much better player. This page shows you that The act of splitting or separating a laminate into layers. is a possible clue for delamination. Delamination: Delamination is a mode of failure for composite materials and steel. In laminated materials, repeat...